2+6 Cabinet Nesting Production Line for Panel Furniture. All equipments are processed continuously to maximize production efficiency, and only one person is needed to operate. It can process around 1000 boards a day!
Brand:
DEELEEItem NO.:
DLX-264-GMOrder(MOQ):
1Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
60 days
Production Line Introduction
Deelee two plus six cabinet production line includes board feeding system, board surface processing system, board conveying system, board processing system and finished product blanking system. One through type labeling machine(two labeling head concluded) can serve six cnc nesting machine, gantry palletizing will not harm the materials, also greatly increases the number of plates stored in the material warehouse. All equipments are processed continuously to maximize production efficiency, and only one person is needed to operate. It can process around 1000 boards a day!
Production Line Workflow
1. Under the control of the central control system, the board to be processed is sent to the auto labeling system by the plate feeding system through palletizing feeder.
2. In the auto labeling system, according to the number and position of the plate to be processed, the labeling efficiency is improved and the site is saved. After that, the labeled board will be pushed out of the conveying system.
3. The conveying direction is controlled by the central control system. The plate to be processed is sent to the corresponding board processing system.
4. Complete the processing, milling, drilling or cutting of the plate.
5. Conveyor device transports the finished panel to the unloading table, and the worker or manipulator receives the material.
Production Line Capacity and Consumption
| 4*8ft Board | Pc/10 hours | 1200 |
| Actual capacity | M²/10 hours | 3500 |
| Board utilization | % | 0.88 |
| Production line power | KW | 163KW |
| Labor cost | Person/Set | 1-2 |
| Spoil board consumption | Board/1pc spoil board | 1000 |
| Tool consumption | Board/1pc tool bit | 2-3 |
| Area | M² | 188 |
121 cabinet nesting production line consists of one labeling machine, two nesting cnc machine and one robot. This line can process around 300pcs boards a day in 10 working hours, only need one person to operate.
Learn More
1+3 Modular furniture Production Line for Cabinet Nesting. Can process 500-600 large boards a day, and only need one person to operate.
Learn More
A single set of equipment only needs one person to operate, one day's capacity can up to 500m²
Learn More
121 Intelligent Labeling and Nesting Cell for Panel Furniture Production Line combines one labeling machine, two nesting CNC router machine and a sorting robot. Which can minimize labor force and improve the production efficicency.
Learn More
Machine is suitable for the production of large quantities of cabinet furniture production, and the maximum stacking thickness can reach 100 mm. Four sheets can be cut at a time, and one day can process 600-750 sheets.
Learn More
CNC nesting machining center for cabinet furniture making, with auto loading and unloading system, one day can process 150pcs boards for cabinet nesting or 40pcs boards for kitchen cabinet door engraving and nesting.
Learn More
Nesting ATC cnc router machine with drill block. Machine can continue to work during the loading. Instantly clean the table for an average of five minutes to process a board without interruption. One person can do 300 square meters a day on average, and the labor intensity is low.
Learn More
