1+3 Modular furniture Production Line for Cabinet Nesting. Can process 500-600 large boards a day, and only need one person to operate.
Brand:
DEELEEItem NO.:
DLX-130-GTOrder(MOQ):
1Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
60 days
Production Line Introduction
DEELEE one plus three cabinet production line includes board feeding system, board surface processing system, board conveying system, board processing system, and a finished product blanking system. One labeling machine of this production line can serve three CNC nesting machines for nesting materials, and all equipment is processed without interruption, which maximizes production efficiency and only requires one person to operate. Can process 500-600 large boards a day.
Production Line Workflow
1.Under the control of the central control system, the boards to be processed are sent from the board feeding system to the surface processing system, and the board surface processing system is marked in sequence according to the number and position of the boards to be processed.
2.Push the labeled board out of the conveyor system.
3.The conveying direction is controlled by the central control system. Send the board to be processed into the corresponding board processing system
4.Finish the processing of the board, milling, drilling and cutting.
5.Integrated processing of wall boards.
6.The pushing device transports the finished panels to the unloading table, and the workers collect the finished panels.
Production Line Capacity and Consumption
| 4*8ft Board | Pc/10 hours | 600 |
| Actual capacity | M²/10 hours | 1700 |
| Board utilization | % | 0.88 |
| Production line power | KW | 76KW |
| Labor cost | Person/Set | 1 |
| Spoil board consumption | Board/1pc spoil board | 1000 |
| Tool consumption | Board/1pc tool bit | 60 |
| Area | M² | 185 |
121 cabinet nesting production line consists of one labeling machine, two nesting cnc machine and one robot. This line can process around 300pcs boards a day in 10 working hours, only need one person to operate.
Learn More
2+6 Cabinet Nesting Production Line for Panel Furniture. All equipments are processed continuously to maximize production efficiency, and only one person is needed to operate. It can process around 1000 boards a day!
Learn More
A single set of equipment only needs one person to operate, one day's capacity can up to 500m²
Learn More
121 Intelligent Labeling and Nesting Cell for Panel Furniture Production Line combines one labeling machine, two nesting CNC router machine and a sorting robot. Which can minimize labor force and improve the production efficicency.
Learn More
ATC CNC Router Machine for Thermofoil Cabinet Door Making is Co-use with kitchen cabinet door production line do the front side processing of the doors.
Learn More
Co-use with cabinet doors production line, used in back side processing(includes hinge hole) and laser labeling of the doors.
Learn More
Machine is capable of horizontal and vertical drilling and grooving on a variety of materials (particleboard, medium density fiberboard, plastic and light alloy).
Learn More
Nesting ATC cnc router machine with drill block. Machine can continue to work during the loading. Instantly clean the table for an average of five minutes to process a board without interruption. One person can do 300 square meters a day on average, and the labor intensity is low.
Learn More
