Take a one plus four production line as an example. Two people can operate the entire production line (one of them is assisted) with a daily production capacity of more than 320 square meters.
Brand:
DEELEEItem NO.:
DLX-130-GMOrder(MOQ):
1Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
60 days
Production Line Introduction
Our company exploited a woodworking production line for thermofoil kitchen cabinet door. General process as below: First labeling on the side which is coated melamine paper. Then send to the CNC machine by transfer belts for the reverse side processing, includes the hinge hole, wooden glass door’s edge trimming. Then transfer the whole panel again, turnover the panel to the front side by panel turnover machine, then send to the corresponding ATC CNC machine for the pattern engraving and cutting.
All the processes are finished automatically, distribute all the panels by a centrally-controlling machine! Front and reverse side’s route output of the panel, programme and production line control of the hinge hole and wooden glass door, suit for any furniture production software, includes 2020 software. All the software and hardware part are finished by our company!
Many famous furniture company in China is using our production line now, one labeling machine can service one reverse side Ccenter and three front side CNC machine, our production line can shorten the delivery time to 3 days for the cabinet furniture industry!
Production Line Workflow
1.Put the panel on the hydraumatic loading table, Can put 30 panels 1.2*2.4m once a time.
2.Panel auto labeling, doors back side, window hinge hole processing.
3.Transfer to panel turnover system to turn over the panel from back side to front side.
4.Portrait transfer belt transfer the panel to corresponding 40 tools ATC working center.
5.40 tools ATC working center do doors front side processing.
6.Workers get the final doors at the auto unloading table in the end.
Production Line Capacity and Consumption
| 4*8ft Board | Pc/10 hours | 128 |
| Actual capacity | M²/10 hours | 320 |
| Board utilization | % | 0.9 |
| Production line power | KW | 124KW |
| Labor cost | Person/Set | 1-2 |
| Spoil board consumption | Board/1pc spoil board | 1000 |
| Tool consumption | Month/4 sets diamond tool bit | 2-3 |
| Area | M² | 160 |
Our fully automatic front and back cabinet door panel production line is the first domestic production line for the automatic processing of thermofoil kitchen cabinet door.
Learn More
Apply for kitchen cabinet doors automatic production, Closets and cabinets making with very high efficiency ,labor-saving and great performance with a daily production capacity of more than 320 square meters.
Learn More
Co-use with cabinet doors production line, used in back side processing(includes hinge hole) and laser labeling of the doors.
Learn More
DEELEE 121 cabinet nesting production line consists of one labeling machine, two CNC nesting machine and one sorting robot. This line can process around 300pcs boards a day in 10 working hours, only need one person to operate. (Custom 7/9 feet large boards are supported. Detailed parameters can be seen in the following text)
Learn More
DEELEE CNC Nesting Machines are suitable for processing furniture wood boards of 7/9 feet and 7/10 feet. There are different processes such as engraving, drilling and cutting can be used. We use three-axis screw transmission to precisely process the kitchen cabinet door and cabinet nesting production line. It can be equipped with auto loading and unloading system, labeling machine and sorting robot at the front and back, capable of processing 150 large boards per day.
Learn More
121 cabinet nesting production line consists of one labeling machine, two nesting cnc machine and one robot. This line can process around 300pcs boards a day in 10 working hours, only need one person to operate.
Learn More
ATC CNC Router Machine for Thermofoil Cabinet Door Making is Co-use with kitchen cabinet door production line do the front side processing of the doors.
Learn More
